The Stage 6400RP is a low cost rack and pinion stage that offers 6" x 4" of travel in a thin (.75" thick) X, Y stage. The unit has a standard circular dovetail mount that allows it to easily attach to most microscopes. The X, Y stage provides 15um repeatability with a submicron resolution. The unit also offers control of the Z-axis. The Z-axis drive easily attaches to most microscopes and provides up to 0.1um resolution. The stage 6400 provides precise control of the X, Y axis speed through an exceptionally smooth joystick. The speed is proportional to joystick deflection with velocities from as slow as single steps to full traverse speed. Remote focus of the z-axis is provided via a focusing knob on the controller. The unit also provides three user selectable sensitivities for the joystick and Z-encoder for added control. The unit con be controlled manually or through standard RS-232 commands. The controller provides a display of X, Y and Z coordinates locally on an LED display. These coordinates are also available via RS-232. The stage 6400 is an economical unit that works well in a number of applications.

• X, Y axis travel - 6" x 4"
• X, Y axis Resolution - 0.678um
• X, Y axis Repeatability - 15um
• Z axis travel - Entire microscope travel.
• Z axis Resolution - 0.1um / 0.2um (depends on microscope)
• Tabletop controller unit size is 7"D x 10.5"W x 3"H

• Three user-selectable speed sensitivities (joystick/encoder).
• Cast aluminum controller shields against RFI radiation from internal microprocessor.
• LED display of X, Y and Z coordinates
• Complete remote control via RS-232C Serial Communications
• Maximum speed is in excess of 25mm/sec
• Remote focus of the Z-axis via rotary Knob on controller.
• User Adjustable Limit Switches.
• 3 operator selectable levels of Control Knob responsiveness.
• Clean room compatible.
• Universal 50/60 Hz, 90-240 Volt AC input power supply.
• Cross-roller bearings for extra precision and rigidity